banner

News

Brief Introduction to Replace Auto Brake Hose of Bike

Update:09-10-2017
Summary:

Over time, the brake cable collects dirt, water infiltr […]

Over time, the brake cable collects dirt, water infiltrates them, and they are worn. This is one of the repairs you occasionally repair, and do not wait for parts to be removed before repairing. Repairing the cable every year is a good thing, or if you ride a lot faster. After replacing the cable, you will be able to understand the difference immediately. Auto Brake Hose is smoother and more efficient.

This guide will specifically replace the brake cable for the straight handlebar brake. The process of other brake bar types is very similar and can only be changed by entering the cable. This will vary depending on the manufacturer, and information is usually available on its website, so you can easily apply most of the guidelines to any non-water cable replacement and have a little intuition.

You will need a new brake cable. You should check this with the same nipple style as your current brakes at the end. This will vary depending on the type of brake you have. If you intend to replace the cable housing, you also need a cable housing, as well as metal sleeves, end caps and wire cutters. Make sure to use professional wire cutting machines. If you do not have a request for your local bike store to use existing cable cutting cables as a guide.

Before removing the brake cable, look at how to bypass the bike. This will change between different bikes. If you do not have a good memory, then the way the photo is taken is thread, so you can repeat it once it is deleted. Use the Allen wrench to remove the clamping bolts that secure the brake cable in place.

Turn the tube adjuster and arrange it so that the cable passes and loosens the cable. You need to pull the brake lever to secure the cable connector to the nest. Pull out the old cable and retain all the parts.