banner

News

How to install the air pressure bar

Update:22-08-2017
Summary:

    1. The gas spring piston rod must be installed in a […]

    1. The gas spring piston rod must be installed in a downward position, and shall not be flipped, thus reducing friction and ensuring optimum damping quality and cushioning performance.
   2. Determine the location of the fulcrum is the gas spring can work correctly to ensure that the gas spring must be installed in the correct way, that is, when closed, let it move through the center line, otherwise, the gas spring will often automatically push the door.
   3. Gas springs should not be subjected to tilting or lateral forces in their work. Not for handrails.
   4. To ensure the reliability of the seal, do not damage the surface of the piston rod, is strictly prohibited paint and chemical substances applied to the piston rod. Also do not allow the gas spring to be installed in the desired position after the spray, paint.
   5. Gas spring for high-pressure products, is strictly free to analyze, fire roast, smash hit.
   6. Gas spring piston rod is strictly prohibited to the left. If you need to adjust the direction of the joints, only to the right.
   7. Use ambient temperature: -35 ℃ - +70 ℃. (Specific manufacturing 80 ° C)
   8. Install the connection point, should be flexible rotation, there can be no jamming phenomenon.
   9. Select the size to be reasonable, the size of the force to be appropriate, the piston rod travel size to stay 8 mm margin.

http://www.autocontrolcable.com/