banner

News

Reasonable Use and Installation of Auto Gas Spring

Update:24-07-2017
Summary:

The internal spring of the gas spring is filled with hi […]

The internal spring of the gas spring is filled with high pressure nitrogen and part of the gas spring special oil, the product work without external power, hold stability, can be free and flexible, (can lock the gas spring can be arbitrarily positioned) widely used, but the installation should pay attention The following points:

1. The gas spring piston rod is installed as far as possible to ensure the best damping effect and cushioning performance.

2. The correct fulcrum installation position is the guarantee of the normal operation of the gas spring, that is, when the door closed, let the gas spring to produce a component to the warehouse, otherwise the gas spring will often automatically push the door.

3. Gas springs in the work should not be the role of tilt or lateral force, not for handrails.

4. To ensure the reliability of the seal, do not damage the surface of the piston rod, is strictly prohibited to paint and chemical substances coated on the piston rod, the gas spring should not be pre-installed in the desired location such as welding, grinding, spray paint Processing, this will affect the life of gas springs.

5. Gas spring for high-pressure products, is strictly free to analyze, fire roast, smash hit.

6. If you need to adjust the direction of the joint, clockwise rotation of the cylinder or piston rod.

7. Use the ambient temperature: -30 ℃ - +80 ℃.

8. Installation of the connection point as far as possible with the gas spring swing when the rotation center line vertical, otherwise it will affect the normal expansion of the gas spring, or even jam, abnormal sound and so on.

9. Select the size to be reasonable, the size of the force to be appropriate, the general door closed when the piston rod should be left about 10 mm remaining trip.

Know more about Auto Gas Spring - http://www.autocontrolcable.com/