What is a good way to buy auto parts products? How to buy the most suitable and cost-effective auto parts? Here, NINGBO CIFT AUTO PARTS CO.,LTD. recommends the following buying tips to help you choose the original regular auto parts.

1. The packaging of the original packaging accessories is generally standardized, the standard specifications are unified, and the printing is clear and formal, while the packaging and printing of counterfeit products are relatively poor, and it is often easy to find defects in the packaging;

2. Look at the color specified on the surface of some original accessories, if other colors are encountered, it is a fake and shoddy part;

3. The appearance of printing or casting, marking is clear and formal, and the appearance of counterfeit products is rough;

4. Look at the illegal paint merchants after simple processing, such as disassembly, patchwork, paint, etc., and then pretend to be qualified products to sell, and illegally obtain high profits;

5. According to the design requirements, the original plan requires qualified materials, and counterfeit products mostly use cheap and inferior materials;

6. Look at the appearance of products with poor craftsmanship, although the appearance is sometimes good, but due to poor production technology, cracks, sand holes, slag inclusions, burrs or bumps are prone to occur;

7. If there are problems such as dry cracking, oxidation, color-changing mirror or aging in the stored auto parts, it may be caused by poor storage environment, long storage time, poor materials, etc.;

8. If the clutch rivets are loose, the brake hose is degummed, the electrical parts joints are de-soldered, and the paper filter element joints fall off, etc., it cannot be used;

9. Mark some marks on the official parts of the logo part, such as time gear marks, piston top marks and other assembly marks to ensure the correct installation of the parts, no need to buy;

10. Look at the missing official components Parts must be intact to ensure smooth loading and normal operation. Leaks of individual small parts on some components, generally parallel imports, make loading difficult. Entire component parts are often scrapped due to shortages of individual small parts;

11. Look at the protective layer. In order to facilitate storage and prevent parts from colliding, the parts have a protective layer before leaving the factory. For example, bushings, large and small bearing bushes, pistons, valves, etc. are generally protected by paraffin to avoid damage to their surfaces. If there is no protective layer on the surface, most of these important accessories are parallel imports;

12. Check some important parts of the certificate, especially the assembly, such as carburetor, distributor, generator, etc. There are generally manuals and certificates when leaving the factory to guide users in installation, use and maintenance. If not, most of them are fake and shoddy products;

13. When purchasing auto parts, the main technical parameters should be identified, and the special technology should meet the requirements for use. Some counterfeit and shoddy products look similar to the real ones, but they are not suitable for installation, large or small, and they are always unsatisfactory in use, leaving hidden dangers of accidents.

14. The test report issued by the third party can not only prove the authenticity, but also show its quality.