1. It is very soft when you step on the brake, and there is no damping feeling
The braking distance of an ordinary car is about 40 meters. If the brakes are soft, the braking distance will be extended and the driving safety factor will be greatly reduced.
This braking situation indicates that the master cylinder cup is severely worn. During emergency braking, it is felt that the brake oil is flowing back and should be repaired in time.

2. The brakes are not sensitive and the speed increase is not sensitive
This phenomenon occurs mainly because the brake shoe is not returned in time, and the shaft sleeve, tension spring and other components are not maintained on time.

3. When you hit the brakes, you will hear a very harsh rubbing noise
Possible causes are exhausted brake pads, friction between brake shoes and drum irons, or poor quality brake discs.
When this happens, be sure to replace the brake pads in time.

4. When you hit the brake, you run away and the car leans to the other side
This is the deviation of the brake pads, and it is also a common phenomenon. The main cause is a broken wheel cylinder on one side of the vehicle or a disconnected brake fluid pipe.

When this happens, it is best not to drive on rainy and muddy roads, because there will be great safety hazards. At the same time, four-wheel alignment should be carried out in time to avoid tire damage and excessive wear of the brake pads on one side of the vehicle.



Auto Control Cables